Uniden WDECT 2310 Quick Start Manual page 25

UP306EH (WDECT2310) ENG OM
System Reset
Deregister the Handset
1) Enter the "
(see "Entering the Menu" on page 14).
2) Press the OK soft key.
3) Press the OK soft key. You will hear a confirmation tone.
When deregistration is complete, "
" appears.
4) After deregistering the handset, move to "Deregister the
Base Setting" below.
Deregister the Base Setting
1) Enter the "
" " submenu (see "Entering the
Menu" on page 14). "
" appears.
2) Press the OK soft key. You will hear a confirmation
tone.
The base information will be deleted.
When replacing the base is complete, "
handset(s) to the new base.
3) Place the handset in the base unit to begin registration.
4) While the handset is registering, "
When "
the base.
If "
1/21/04 8:51 AM Page 19
" menu, then the "
" menu, then the
" is displayed, the handset has been registered to
" appears, please try these steps again.
" submenu
" appears, register the
" will appear in the LCD.
[ 19 ]