Welcome; Getting Started; Equipment Setup; Battery Installation - Symbol MC70 User Manual

W
ELCOME
Welcome to the next generation of hand held computing. Hand held computing has never been so
easy and colorful! Please be sure to read through this manual in its entirety so you can
understand how to get your store up and running quickly.
G S
ETTING TARTED

Equipment Setup

1. Unpack all equipment and lay each piece out on the workspace. You will need one electrical
outlet for plugging the equipment in.
It's highly recommended that you save all packaging material and boxes in the
event of a failure.
a. Hooking up the equipment
i. Attach the power supply cables and plug into an electrical outlet
ii. Place the spare battery in the charging cradle. Verify that the light is flashing
red. The battery usually fully charges in less than four hours. Please refer to the
battery section of this manual for more specifics.

Battery Installation

MC70 Hand Held
2. Open the back cover of the MC70 by flipping out the metal wing-tabs on both sides of the
battery cover.
3. Before using the MC70 hand held, install a lithium-ion battery by sliding the battery into
the unit as shown and close the metal wing-tabs.
If the wing-tabs are closed completely, the battery cover should not have
uneven gaps between the battery cover and the back of the MC70 and it should
not move. Ensure the battery is fully inserted. An audible click can be heard as
the battery is fully inserted. A partially inserted battery may result in
unintentional data loss.
SUPERVALU INC v1.0 3 02/05/07