Changing The Digital Security Code - Uniden EXS 9980 Owner's Manual

If the handset battery pack
is completely discharged
or the battery pack is
removed, the digital
security code will be lost.
If this happens, a new
security code is set
automatically next time
the battery pack is
charged.

Changing the digital security code

The digital security code is an identification code used to connect
the handset and the base unit. Normally, setting the code is not
necessary.
The first time you charge your handset, the security code is
automatically set. (See page 2.)
In the rare situation that you suspect another cordless telephone
is using the same security code, you can change the code.
1
Remove the handset from the base
unit. Press page/int'com
2
While the handset is emitting the
paging sound, hold
and replace the handset on the base
unit. The paging tone stops.
Leave the handset on the base
longer than 5 seconds. A random,
new security code is set.
.
page/int'com
49