Table of Contents
Advertisement
You must subscribe to
Caller ID on Call Waiting
in order to use this
feature.
30
Caller ID
You must subscribe to the Caller ID service to use this feature.
When the telephone rings, the Caller ID feature allows you to
view the caller's name and phone number on the display before
you answer the phone.
The handset displays the phone number of the incoming call, the
name, time, and the number of calls. Additionally, you can dial the
displayed number, and store the information for memory dialing.
Setting Caller ID options
There are three Caller ID setup options available; they are
AutoTalk, CIDCW (Caller ID on Call Waiting), and Area Code.
AutoTalk allows you to answer the phone without pressing the
talk
button. If the phone rings when AutoTalk is on, simply
remove the handset from the cradle and the phone automatically
answers the call. If the phone rings when AutoTalk is off, you
must press
to answer the call.
talk
Caller ID on Call Waiting (CIDCW) performs the same as
regular Caller ID on a call waiting number.
You must subscribe to CIDCW from your phone company in
order to use this feature.
If you enter 3-digit area code number in the Area Code option,
your local area code does not appear in Caller ID messages. When
reviewing Caller ID messages, you will see only the local seven digit
number. For calls received from outside your local area code, you
will see a full 10-digit number.
If your calling area requires 10-digit dialing,
do not program this option.
To change your Caller ID options:
1
Press and hold down
The following screen appears.
2
Use the
and
•
selection that you would like to change. Press the
key to toggle between On and Off for Auto Talk and
CIDCW.
3
When you wish to enter Area Code, press
cursor to select "Area Code". Then press
enter the 3 digits area code by using the number keypad
-
. After entering Area Code, press
0
9
4
After you have made your selections, press
return the handset to the charging cradle.
1 Auto Talk:Off
2 CIDCW
call id
.
3 Area Code:
ª
keys to move the cursor to the
:On
select
to move the
ª
select
and
select
.
call id
and
Advertisement
Table of Contents
