Omron NJ Series Connection Manual page 25

9
A confirmation dialog box on the
right is displayed. Confirm that
there is no problem and click the
Yes Button.
A screen stating "Synchronizing"
is displayed.
A confirmation dialog box on the
right is displayed. Confirm that
there is no problem and click the
No Button.
*Do not return to RUN mode.
10
Confirm that the synchronized
data is displayed with the color
specified by "Synchronized"
and that a message is displayed
stating "The synchronization
process successfully finished".
If there is no problem, click the
Close Button.
*A message stating "The
synchronization process
successfully finished" is
displayed if the Sysmac Studio
project data and the data in the
Controller match each other.
*If the synchronization fails,
check the wiring and repeat
from step 1.
7．EtherCAT Connection Procedure
22