5
The Connect to Controller
Dialog Box is displayed.
Select the Direct connection via
USB Option of Connection type.
Uncheck both the Upload the
project Check Box and the
Display the Troubleshooting
Dialog Box Check Box of
Operation after Connection.
Click the Connect Button.
6
Check the contents and click the
OK Button if a confirmation
dialog box on the right is
displayed.
*The displayed dialog depends
on the status of the Controller
used. Check the contents and
click the OK or Yes Button to
proceed with the processing.
7
A dialog box on the right is
displayed. Check the contents
and click the OK Button.
7.EtherCAT Connection Procedure
13