Deleting A Message; Deleting All Messages; Message Full Indication - Uniden EXAI 918 Operating Manual

3
2. Press
at anytime
to skip to the next
message.
3
Each time is pressed, the system scans
forward one message. If you have several
messages, press
message you want to play.
62
3. Press
at anytime to stop reviewing
messages and return to Standby.
Note: The system automatically returns to
Standby when all messages have played.

Deleting a Message

62
1. Press
to
review your
messages.
2. If you decide to
delete a message,
4
press and hold
anytime during the
message.
The system beeps
and immediately
goes to the next
message.
Note: When you press
the message. Once you delete the message, it
cannot be replayed.
3. When all messages have played, a long
tone sounds.
30
3
until you get to the
4
, you are deleting

Deleting All Messages

You can delete all your messages without deleting
each separate message.
4
1. Press and hold
Note: You must
review all new
messages before
using the "Delete All
Messages" feature.
2. A long tone sounds once the messages have
been deleted.
Important: This cannot be undone, so be sure
you want to delete all the messages before
using the "Delete All Messages" feature.

Message Full Indication

The EXAI918 has a maximum record time of
approximately 20 minutes, or up to 40 incoming
messages. When the memory is full, the
Answering System will not record incoming calls.
To return the system to normal operation, follow
these steps.
1. When the memory
is full, the phone will
ring 10 times before
the announcement
"No remaining time"
plays.
2. Delete some or all of your messages.
.
EXAI918