If the Base Unit loses power while the Handset is off the Base Unit, the Digital Code may be erased.
When this happens, the Handset will not function. To reestablish communication between the Handset
and Base Unit:
1. Restore power to the Base Unit.
2. Place the Handset
back on the
Base Unit.
Handset Volume Controls
Please refer to the foldout in front of your operating guide for key positions.
To adjust the ringer volume of your Handset, press volume/cancel until you hear the desired ringer tone
and volume.
Two-tone High
Three-tone High
To adjust the receiver volume, press volume/cancel while you are on a call.
VOLUME HIGH
Channel Selector Button
If the audio becomes weak or scratchy, press chan
on the handset to select a clearer channel.
16
3. The Status icon on
the Base Unit will
blink to indicate that
the Digital Security
Code is set.
VOLUME LOW
Two-tone Low
Three-tone Low
EXAI918