Table of Contents
Advertisement
root@# set access address-assignment pool junosDHCPPool family inet dhcp-attributes name-server dns-server-ip
10. Commit the configuration:
[edit]
root@# commit
Establish the Connection
1. Connect the device to the Internet Service Provider (ISP) by using the following step:
NOTE:
For information on interface mapping, see
Connect one of the WAN ports ranging from xe-0/0/8 to xe-0/0/15 to the ISP. The device is assigned an IP address
by the ISP through DHCP.
Figure 4: Connecting the Interfaces on an NFX350 Device
NOTE:
The LTE expansion module must be purchased separately. Optionally, you can obtain a SIM card
from the ISP and connect the device through LTE.
For more information about SIM card activation, see the How to Configure NFX350 available at:
https://www.juniper.net/documentation/en_US/release-independent/junos/information-products/pathway-pages/nfx-series/product/
2. Connect the laptop to one of the front panel LAN ports ranging from ge-0/0/0 to ge-0/0/7. The laptop is assigned an
IP address by the DHCP server running on the interface.
Figure
4.
Internet
9
Advertisement
Table of Contents
