Advertisement
Product information Wireless data loggers
HD35RE repeater
External RF
antenna
Power supply
Mini USB
connector
HD35REW repeater
External RF
antenna
Warning: unlike HD35RE repeaters, which have external power supply, the HD35REW repeaters are powered only by the internal bat-
tery. To extend the battery life, the RF stage of the HD35REW repeaters is not continuously active; therefore, the HD35REW repeaters are
subject to the following restrictions:
o the alarm events may be reported with a certain delay;
o the reconfiguration of the system may take longer; furthermore, if the configuration of a data logger with LCD is changed via the
logger keyboard, the change is not notified to the base unit and to the HD35AP-S software;
o to guarantee the same transmission reliability of a system with HD35RE repeaters, HD35ED... devices may be obliged to transmit
the same packets several times: this could affect battery life.
Power supply
Power consumption
Battery autonomy
Transmitting frequency
Antenna
Transmitting range
Serial outputs
Connection
push-button
LED indicators
Keyboard
Working temperature and
humidity range
Housing
Weight
Installation
Power supply
Battery autonomy
Transmitting frequency
Antenna
LED
Transmitting range
LED indicators
Push‑buttons
Working temperature and
humidity range
Housing
Weight
Installation
Internal 3.7 V lithium-ion rechargeable battery,
capacity 2250 mA/h, JST 3-pole connector
Optional 6 Vdc external power adapter (SWD06)
Powered directly from the PC USB port
≈30 mA (E, U) / ≈38 mA (J)
≈3 days (E, U) / > 2 days (J)
868 MHz, 902-928 MHz or 915.9-929.7 MHz
depending on the model
Fixed whip external RF antenna
See table 2
USB with Mini-USB type connector (cable CP31)
Only for configuration and firmware update, not
for data download
Presence of external power supply, battery charge
level, RF communication status.
Push-button for connection / PING (for testing RF)
-10...+60 °C / 0...85 %RH not condensing
Plastic material
Dimensions 135 x 86 x 33 mm (excluding antenna)
200 g approx. (including battery)
Wall mount support (supplied) for removable
installation or flanges (optional) for fixed installation
Internal 3.6 V lithium-thionyl chloride (Li-SOCl
rechargeable battery, capacity 8400 mA/h, size C,
Molex 5264 2-pole connector
2 years typical (repeating the signal of 5 data loggers
transmitting every 30 s)
868 MHz, 902-928 MHz or 915.9-929.7 MHz
depending on the model
Fixed whip external RF antenna
See table 2
Battery charge level, RF communication status.
Push-button for connection inside the instrument
-20...+70 °C / 0...100 %RH not condensing
Material: Polycarbonate
Dimensions: 80 x 120 x 55 mm (excluding antenna)
Protection degree: IP 67
250 g approx. (including battery)
Wall mounted or fixed to the 40 mm diameter mast by
means of the HD2003.77/40 clamping (optional).
) not
2
27
Advertisement
