Advertisement
Product information Wireless data loggers
Technical specifications
HD35AP – HD35APG/HD35AP3G – HD35APS – HD35APW base units
External RF
antenna
Power supply
connector
(*)
The connection of the SWD06 external power supply is necessary if the Ethernet, Wi-Fi or GSM/3G transmission is used.
(**)
The intensive use of the GSM/3G transmission can significantly increase the power consumption and reduce the battery life.
24
Versions
Power supply
Power consumption
Battery autonomy
(typical)
Transmitting frequency
Antenna
Transmitting range
Serial outputs
Ethernet connection
Wi‑Fi connection
GSM/GPRS connection
3G connection
Mini USB
RS485 M12 connector
(HD35APS only)
Internal memory
or
RJ45 Ethernet connector
(HD35APW only)
LED indicators
Working temperature and
humidity range
Housing
Weight
Installation
HD35AP: USB output only
HD35APS: USB and RS485 MODBUS-RTU outputs
HD35APW: USB output, Wi-Fi and Ethernet interface
HD35APG: USB output and GSM/GPRS module
HD35AP3G: USB output and 3G/GSM/GPRS module
Internal 3.7 V lithium-ion rechargeable battery,
capacity 2250 mA/h, JST 3-pole connector
Optional 6 Vdc external power adapter (SWD06)
Powered directly from the PC USB port
≈30 mA (E, U) / ≈38 mA (J) without Ethernet/Wi-Fi and
with typical GSM/3G activity
(**)
≈180 mA with Ethernet, ≈150 mA with Wi-Fi
≈3 days (E, U) / > 2 days (J) if not connected to the
local network and with typical GSM/3G activity
≈12 hours with Ethernet, ≈14 hours with Wi-Fi
868 MHz, 902-928 MHz or 915.9-929.7 MHz (not for
HD35APG) depending on the model
Fixed whip external RF antenna
Whip external GSM/3G antenna with cable (HD35APG
and HD35AP3G only)
See table 2
USB with Mini-USB type connector (cable CP31)
RS485 with MODBUS-RTU protocol (HD35APS only)
Only in HD35APW model. Permits (if the Internet
connection is available) sending alarm e-mail and
the recorded data via e-mail, to an FTP address or to
an HTTP server (Cloud). Allows the MODBUS TCP/
IP protocol.
Only in HD35APW model. Permits (if the Internet
connection is available) sending alarm e-mail and
the recorded data via e-mail, to an FTP address or to
an HTTP server (Cloud). Allows the MODBUS TCP/
IP protocol.
Only in HD35APG and HD35AP3G models. For
sending alarm e-mail or SMS and data via e-mail, to
an FTP address or to an HTTP server (Cloud). Allows
the GPRS TCP/IP protocol.
Only in HD35AP3G model. For sending alarm e-mail
or SMS and data via e-mail, to an FTP address or
to an HTTP server (Cloud). Allows the 3G TCP/IP
protocol.
The number of samples that can be stored depends
on the type of data loggers connected. The capacity
is 226,700 samples if all the data loggers record 7
quantities.
Presence of external power supply, battery charge
level, RF communication status.
-10...+60 °C / 0...85 %RH not condensing
Plastic material
Dimensions 135 x 86 x 33 mm (excluding antenna)
200 g approx. (including battery)
Wall mount support (supplied) for removable
installation or flanges (optional) for fixed installation
(*)
(**)
Advertisement
