Storing A Phone Number In Memory - Uniden DS72 Owner's Manual

The pause button count
as one digit. Pressing
redial/p more than
once increases the length
of pause between numbers.
3. Press on the base unit to establish communications between the calling party.
speaker
Transferring a call from the Base Unit to the Handset
1. During a call, press
int
and the handset is paged. (If there is no answer press
on hold).
2. At the handset, press
int
between base unit the and the handset. Speak into the microphone.
3. Press on the handset to establish communications.
talk

STORING A PHONE NUMBER IN MEMORY

Entering Handset Memory Numbers
1. Remove the handset from the base.
2. Press . The
mem talk
3. Enter the phone number, up to 16 digits.
If a pause is needed during dialing
to access long distance service, press
to insert a pause.
redial/p
4. Press again.
mem
5. Enter the memory location (01-20) on
the keypad. A tone indicates that
the number is stored.
Entering Base Unit Memory Numbers
1. Press . The
mem in use/hold/mute
2. Enter the phone number, up to 16 digits.
If a pause is needed during dialing
to access long distance service, press
to insert a pause.
redial/p
3. Press again.
mem
4. Enter the memory location (01-20) on
the keypad. A tone indicates that
the number is stored.
on the base unit, the call is placed on hold automatically
to answer the page. An intercom link is now established
LED blinks.
talk
redial/p
LED blinks.
mute
flash
charge
in use/hold/mute
power
again to return to the call
int
mem
int mem hold
mem
redial/p
vol
redial/p
speaker
inuse/hold/mute
23