Table of Contents
Advertisement
MN004476A01-AE
Chapter 6: Advanced Features
When your radio is dynamically regrouped, it receives a dynamic regrouping command and
automatically switches to the dynamically regrouped channel. You hear a tone and the display shows
the name of the dynamically regrouped channel.
When the dispatcher cancels dynamic regrouping, the radio automatically returns to the previous zone
and channel.
If you access a zone or channel that has been reserved as a dynamically regrouped mode for other
users, you hear an invalid tone.
6.2.5.1
Requesting a Reprogram (Trunking Only)
When and where to use: This feature allows you to notify the dispatcher when you want a new
dynamic regrouping assignment.
Procedure:
Perform one of the following actions:
•
Press the preprogrammed Reprogram Request button to send reprogram request to the
dispatcher.
•
or to Rpgm then press the Menu Select button directly below Rpgm to send reprogram
request to the dispatcher.
The display shows Reprogram Rqst and Please wait.
If you hear five beeps, the dispatcher has acknowledged the reprogram request. The display shows
Ack received and the radio returns to the Home screen.
If the dispatcher does not acknowledge the reprogram request within six seconds, you hear a low-
pitched alert tone and the display shows No acknowledge. Try again or press
return to the Home screen.
6.2.5.2
Classification of Regrouped Radios
The dispatcher can classify regrouped radios into Select Enabled or Select Disabled categories.
Select Enabled
Select-enabled radios are free to change to any available channel, including the dynamic-
regrouping channel, once you have selected the dynamic-regrouping position.
Select Disabled
Select-disabled radios cannot change channels while dynamically regrouped. The radio is forced to
remain on the dynamic-regrouping channel.
The Scan and Private Call features are unavailable when your radio is Select Disabled.
6.2.6
Dynamic Zone Programming
Dynamic Zone Programming (DZP) provides one or more Dynamic Zones to store frequently used
channels for conventional or trunking.
NOTICE: Your radio must be preprogrammed for you to use this feature. At least one zone in
the radio must be a non-dynamic zone.
54
to cancel and
Advertisement
Table of Contents
