Table of Contents
Advertisement
When you hear the prompt that tells you to enter the number, open
the phonebook and find the entry that contains your code number.
Press
MENU/sELECT
mind, use
pHoNEbook/LEfT
Finding a Lost Handset
With the phone in standby, press
All the handsets will beep for 1 minute or until you press
again or press
INTErCoM
Using Do Not Disturb
The Do Not Disturb or DND feature turns off the ringers of the
base and all handsets at the same time.
With the phone in standby, press and hold
base. The phone automatically turns on the answering system and
shows Do Not Disturb in the display on all handsets.
To cancel, press
If you turn the answering system off while dNd is on, the phone
turns off dNd along with the answering system.
Using Call Block
If you subscribe to Caller ID, you can save phone numbers to the call
block list. When a call comes in, the phone compares the received
phone number to the numbers on the call block list. If the phone
number is on the list, the phone replaces the caller's name with Call
Blocked and disconnects the call. (The caller hears a reject tone.)
The call block list holds 20 entries, and all handsets share the same
list. You can add entries through the Call Blocking menu, by selecting
Add Call Block in the CID menu, or by blocking incoming calls. (Only
one handset can edit the call block list at a time.)
Blocking incoming calls
When the phone rings, wait until the display shows the Caller ID
information (usually after the second ring). If you want to block the
call and add this number to the call block list, press
phone asks you to confirm, press
to transmit the code. Or, if you change your
to close the phonebook.
TaLk/fLasH
Using Special Features
do NoT dIsTUrb
fINd HaNdsET/INTErCoM
followed by
ENd
do NoT dIsTUrb
again.
or
MENU/sELECT
on the base.
fINd HaNdsET/
on a handset.
on the
. When the
bLoCk
.
bLoCk
Hide quick links:
Advertisement
Table of Contents
