Uniden DSS 2455 Quick Start Manual page 71

UP308BH (DSS2465) ENG OM 1/14/05
Symptom
The handset or the base can't
join the conversation.
The answering system
does not work.
Messages are incomplete.
After a power failure, the
outgoing message is deleted.
No sound on the base unit
speaker during call monitoring
or message playback.
Cannot access remote call-in
features from another
touch-tone phone.
Time stamp cannot be heard.
If you still have a problem.
11:49 AM Page 65
Suggestion
• Make sure that more than 3 handsets (or 2 handsets when the base is used
for the conference) are not in use.
• When recording a conversation, the 2nd handset (or the base) cannot join
the conversation.
• Make sure the base unit is plugged in.
• Make sure that the answering system is turned On.
• Make sure that the message record time is not set to Announce only
(see page 47).
• The incoming messages may be too long. Remind callers to leave a
brief message.
• The memory may be full. Delete some or all of the saved messages.
• Record your greeting again. The default message should remain.
• Adjust the speaker volume on the base unit.
• Make sure the call screen feature is set to On.
• Make sure you are using the correct PIN number.
• Make sure that the touch-tone phone you're using can transmit the tone
for at least two seconds. If it cannot, you may have to use another phone
to access your phone.
• Make sure you have set the time (see "Setting Day and Time" on page 21
or "Setting the Time" on page 45).
• Check our web site for the latest information and frequently asked questions.
www.uniden.com.au
www.uniden.co.nz
[ 65 ]