Honda CBR1000RA Manual page 177

20180713160204_32MKF6100_eng_BOOK Page 177 Friday, July 13 2018 16:21:28 JST
Other Adjustments
u
# Front Spring Preload
You can adjust the spring preload by the
adjuster to suit the load or the road surface.
Pull
Coupler clip
Push
174
Adjusting the ÖHLINS Smart EC System
Connector cover
Front suspension
connector
Make sure the ignition switch is in the
1.
(Off) position.
Slide the connector cover, and then
2.
disconnect the front suspension
connector from the coupler clip.
Disconnect the front suspension
3.
connector.
Do not remove by pulling on the wire
u
harness.
Adjusters