Low Battery Indicator - Uniden XCA4500 Instruction Manual

2. Make sure the
lights. If the LED doesn't light,
check to see that the AC
Adapter is plugged in and
that the Handset is making
good contact with the Base
Unit charging contacts.
Continuous Battery Charging
For the best battery performance, return the Handset to the Base Unit at the
end of the day to keep the battery fully charged.

Low Battery Indicator

When the Battery Pack in the
Handset is very low and
needs to be charged, the
TALK/BATT LOW
If the TALK/BATT LOW
eliminate its functions to save power. The table below describes what to do
to return your phone to normal operation.
During a Call
T
Only the
The Handset beeps and the
TALK/BATT LOW
every three seconds.
Complete your call as quickly as
possible.
Return the Handset to the Base
Unit for charging.
Note: Allow 15 to 20 hours without interruption for the Handset to fully
recharge.
CHARGE LED
LED flashes.
LED begins to flash, the phone is programmed to
button operates.
LED flashes once
In Standby Mode
None of the buttons will operate.
The Handset
flashes once every three seconds.
You will not be able to make a call.
Return the Handset to the Base
Unit for charging.
26
NEW MESSAGE
IN USE
STOP
BATTERY
CHARGE
DELETE
POWER
REMOTE
TALK
TALK
BATT LOW
1 2
ABC DEF
1
2
3
7
JKL
GHI MNO
4 5
6
4
TUV
PRS WXY
7 8
9
TALK/BATT LOW
REPEAT
ANS ON/OFF
1
3
9
LED