KTM 125 SX 2018 Setup Instructions page 10

3 WORK
3.1
Note
Material damage The vehicle may be damaged by incorrect procedure when parking.
Significant damage may be caused if the vehicle rolls away or falls over.
The components for parking the vehicle are designed only for the weight of the vehicle.
–
Park the vehicle on a firm and level surface.
–
Ensure that nobody sits on the vehicle when the vehicle is parked on a stand.
3.2
Note
Material damage The vehicle may be damaged by incorrect procedure when parking.
Significant damage may be caused if the vehicle rolls away or falls over.
The components for parking the vehicle are designed only for the weight of the vehicle.
–
Park the vehicle on a firm and level surface.
–
Ensure that nobody sits on the vehicle when the vehicle is parked on a stand.
3.3
8
Raising the motorcycle with a lift stand
401942-01
Removing the motorcycle from the lift stand
1 0 0 1
402001-10
Installing the fork legs
H01182-10
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (78129955100)
Neither wheel is in contact with the ground.
–
Secure the motorcycle against falling over.
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, insert plug-in stand
side of the wheel spindle.
Info
Remove the plug-in stand before riding.
Main work
–
Position the fork legs.
Air release screw 1
the front.
A
Valve of the left fork leg faces the front.
1
into the left
of the right fork leg is positioned to