Updating The Software - Kenwood KTC-500DAB Manual

Changing the information displayed on the screen
Your KTC-500DAB can display the name of the radio station you are listening to, or the quality and signal strength of the station.
1. Press .
2. Turn and press the Select dial to choose 'SETTINGS' > 'DISPLAY' > 'INFO'.
3. Turn and press the Select dial to choose a setting.
To display the names of radio stations, choose 'STATION'.
l
To display the quality and signal strength of radio stations, choose 'QUALITY'.
l
Changing the screen brightness
A light sensor on the wireless controller automatically sets the screen brightness, but you can manually change it.
1. Press .
2. Turn and press the Select dial to choose 'SETTINGS' > 'DISPLAY' > 'BRIGHTNESS' > 'MANUAL'.
3. Turn and press the Select dial to choose a brightness level.
By default, the screen on the wireless controller automatically dims after 15 seconds. To change the length of time before the
screen dims, choose 'SETTINGS' > 'DISPLAY' > 'TIMEOUT'.

Updating the software

We may provide software updates to improve your KTC-500DAB. To find out more about updating the software on your
KTC-500DAB, visit kenwood.com/cs/ce/.
18