Table of Contents
Advertisement
Included items (please check)
• Power cord × 1
• Handles × 2
• Grill (L) × 1
• Grill (R) × 1
• Filter element (L) × 1
• Filter element (R) × 1
Documentation
• Quick start guide (this document)
This explains installation and basic use.
• Owner's manual (HTML)
This explains all items necessary for setup and operation.
• ProVisionaire Amp Editor setup guide (HTML)
This explains how to use the ProVisionaire Amp Editor software to control this product from a computer.
About ProVisionaire Amp Editor
ProVisionaire Amp Editor is software that lets you use your computer to construct, monitor, and control a system of network-
capable amplifiers (such as the XMV series) including this product. ProVisionaire Amp Editor allows centralized monitoring or
control of multiple connected devices.
You can download ProVisionaire Amp Editor from the Yamaha Pro Audio website.
http://www.yamahaproaudio.com/
Firmware updates
This product is designed to allow its firmware to be updated in order to improve its operability, add functionality, or fix problems.
This product has the following two firmware items.
• Firmware of the unit itself
• Firmware of the Dante module
The process of updating the firmware of the unit itself is performed from ProVisionaire Amp Editor. The process of updating the
firmware of the Dante module is performed from Dante Firmware Update Manager.
For details on the update procedure and settings for the unit, refer to "ProVisionaire Amp Editor setup guide."
NOTE
It will be necessary to update other devices depending on the version of each device in the Dante network. For details, refer to the firmware
compatibility chart provided on the above Yamaha website.
8
• Machine screws for handle (M5 × 12 mm) × 4
• Euroblock plug mini for GPI (8-pin) × 2
• Euroblock plug for analog input (3-pin) × 4 (PC-DI series only)
• Euroblock plug for speaker output (8-pin) × 1 (PC-DI series only)
• Cable ties × 4 (PC-DI series only)
• Quick start guide (this document)
Advertisement
Table of Contents
