FujiFilm FinePix Z20fd Owner's Manual page 69

[l]
Cautions
• Use only memory cards that have been formatted
in the camera and contain pictures taken with the
camera. If a memory card containing a large num-
ber of images is inserted, there may be a delay before
FinePixViewer starts and FinePixViewer may be un-
able to import or save images. Use a memory card
reader to transfer pictures.
• The indicator lamp blinks green and orange during
data transfer. Make sure the indicator lamp is out be-
fore turning the camera off, opening or closing the
lens cover, or disconnecting the USB cable. Failure to
observe this precaution could result in loss of data or
damage to internal memory or the memory card.
• Disconnect the camera before inserting or removing
memory cards.
• Use FinePixViewer to copy voice memos.
• FinePixViewer can not be used to edit MPEG-4 mov-
Ies.
• FinePixViewer may not perform as expected when
run from another computer over a network.
• The user bears all applicable fees charged by the
phone company or Internet service provider when
using services that require an Internet connection.
-::w Disconnecting the Camera
Confirm that the indicator lamp is out and press
~
to
turn the camera off. Disconnect the USB cable.
~f'
Uninstalling FinePixViewer
Only uninstall FinePixViewer before reinstalling the
software or when it is no longer required. After quit-
ting FinePixViewer and disconnecting the camera,
drag the 'TinePixViewer" folder from "Applications"
into the Trash and select Empty Trash in the Finder
menu (Macintosh), or open the control panel and use
"Programs and Features" (Windows Vista) or "Add/Re-
move Programs" (other versions of Windows) to un-
install FinePixViewer, FinePix Resource, and FinePix
Studio. Under Windows, one or more confirmation
dialogs may be displayed; read the contents carefully
before clicking OK.
&'
:s
:s
"
"
...
....
o
:s
'"
55