LG ProBeam Owner's Manual page 115

64
[Auto Off]
(Q. Settings)
If there is no input signal or button press, the projector automatically turns off after the
preset time has elapsed.
[Edge Adjustment]
(Q. Settings)
[Edge Adjustment] adjusts the horizontal and vertical sides of the projected image if
the projector is at an angle and not perpendicular to the screen. This feature ensures
the shape of the projected image is not distorted.
Use this feature only when the projector cannot be set up at the optimal angle. [Edge
Adjustment] may result in a loss of image quality.
•
Some models may not be supported.
[PJT Mode]
(Q. Settings)
This function turns the projected image upside down or flips horizontal.
[Blank Mode]
(Q. Settings)
Selects a background image for the blank mode.
[Projector Control]
(Q. Settings)
Selects either [RS232C] or [HDBaseT] among the inputs that can control the projector.
• Some models may not be supported.
[General] [Timers]
[General] [Edge Adjustment]
[General] [PJT Mode]
[General] [Blank Mode]
[General] [Projector Control]
[Auto Off]