NEC DT930 Series User Manual page 75

1.
(5) Enter the new password.
After entering the new password, press
Set.
(6) Enter the new password again.
After entering the retry password, press
OK.
Note: A maximum of 32 digits (0-9, * and #) can be
used when setting a new password.
(7) When the password entry completes
successfully, the display changes as follows.
or
❍
Press
When the password entry ends in failure, the
TIP
following error message is issued. In that case, press
OK and make a retry.
or
61
or OK.