Backup Or Restore The Settings Data Of The Terminal; To Backup The Settings Data Of The Terminal - NEC DT930 Series User Manual

1.
(23) When the downloading process completes, the
following is displayed.
(24) The display returns to the Download Files
screen upon Exit.
Note: When the downloading process ends in failure,
Downloading Failed! is displayed on the LCD. Check
the following and retry.
Check Points
Download file is not placed in
the specified directory.
A different file name is
specified between DT930 and
FTP/TFTP/HTTPS server.
Incorrect IP address of FTP/
TFTP/HTTPS server has been
entered from the telephone.
The power to FTP/TFTP/
HTTPS server or network
equipment is Off.
LAN cable is disconnected.
Actions
Place the download file in the
specified directory.
Set the same file name from
both DT930 and FTP/TFTP/
HTTPS server.
Set the proper IP address of
FTP/TFTP/HTTPS server.
Turn On the power.
Reconnect the cable securely.
Backup or Restore the Settings Data
of the Terminal
This section explains how to make a backup of the
settings data which has been entered in the terminal to
FTP/TFTP/HTTPS server. The data in the FTP/TFTP/
HTTPS server can also be restored to the terminal.
When downloading theses files, the terminal
needs to be connected to the network that has
FTP, TFTP or HTTPS server.
For details about the FTP/TFTP/HTTPS service,
contact the system administrator.

To Backup the Settings Data of the Terminal

(1) Display the Menu screen, select Settings.
3
Data Backup/Restore.
(2) Select
4
Protocol.
(3) Select
(4) Choose a protocol type of the server which will
sore the Backup file.
(5) According to the selection in [Protocol] screen,
proceed with the following steps below.
(6) Display the Menu screen, select Settings.
1
FTP is selected, continue to with
If
2
TFTP is selected, proceed to
If
STEP 13.
3
If HTTPS is selected, proceed to
STEP 7.
5
Account Settings.
(7) Select
1
User ID.
(8) Select
102
STEP 7.