Gps Antenna Installation - Toyota PZQ60-00341 Fitting Instructions Manual

2. GPS ANTENNA INSTALLATION

Step 1.
Peel the earth plate sticker, before
installing the GPS antenna on to the
earth plate.
 Prior to installing the GPS Antenna Earth
Plate, ensure that the surface of the Earth
Plate has been cleaned using an alcohol
based cleaner.
 To peel the sticker from the Earth Plate,
slice thinly the sticker label side of the Earth
Plate as shown then peel the cutting part of
the Earth Plate Sticker.
.
Step 2.
Install the GPS Antenna on to the
Earth Plate as shown.
Step 3.
Install the GPS antenna with the Earth
Plate on the flat surface behind the
Air Vent Duct as shown.
Cable tie any excess wire.
C-HR │ Dec '16 Onwards
– C-HR SATELLITE NAVIGATION
Issue: 2.0 │ Date: July 2018 │ Page 3 of 10