Connect Power Cord; Complete Installation - EdgeStar CWD1550BL-1 Owner's Manual

11

Connect Power Cord

Connect the power cord on the back of the unit to a properly grounded
3-prong outlet. Please consult a qualified electrician if you are unsure if
your power outlet can meet the power requirements for this unit.
Electrical Connection Notes
• Please connect the power to a socket which is correctly installed
and properly grounded in accordance with local electrical and
building codes.
• Make sure the power supply voltage is compatible with the
machine's rating label.
• Power plug must match the socket and cabinet must be properly
and effectively grounded.
• As the maximum current through the unit is 12A when you are
using its heating function, please make sure the power supply
system (current, power voltage, and wire) at your home can meet
the normal loading requirements of this appliances.
• Do not use a multi-purpose plug or socket as an extension cord.
• Do not touch the electrical cord or plug with wet hands.
• When disconnecting the plug, hold the plug tightly by the base
and pull out. DO NOT pull the power cord forcibly.
• If the plug (power cord) is damaged, it must be replaced by the
manufacturer or an authorized service representative.

Complete Installation

Ensure all connections are secure, and that tools used during setup as well
as all packing materials have been safely stored. You may now open the
water supply valves and proceed to use your new Combo Washer / Dryer.
Before washing clothes for the first time, the washing machine should be
run through a full cycle with detergent without articles of clothing.