Space Requirements - EdgeStar CWD1550BL-1 Owner's Manual

The below dimensions shown are for recommended spacing and custom undercounter installation.
EdgeStar Combo Washer/Dryer

Space Requirements

• The location must be large enough to allow the washer door to be
fully opened.
• Additional spacing should be considered for ease of installation
and servicing. The door opens more than 90°, and it is not
reversible.
• Additional clearances might be required for wall, door, and floor
moldings.
• Additional spacing of 1 inch on all sides of the washer is
recommended to reduce noise transfer.
• Make sure the unit is installed in a location where you are able to
access the electrical outlet.
Washer Dimensions:
6