Maintenance - Blue Rhino Charmglow 82300C Owner's Manual

WARNING
FOR YOUR SAFETY
• Do NOT touch or move
heater for at least 45 minutes
after use.
• Dome is hot to the touch.
• Allow dome to cool before
touching.
5
Contact 1.800.762.1142 for assistance.
Do not return to place of purchase.

Maintenance

To enjoy years of outstanding performance from your heater, make sure
you perform the following maintenance activities on a regular basis:
Inspect the visible portion of the hose before each use of the appliance .
Inspect the entire hose assembly at least annually .
Air flow must be unobstructed . Keep controls, burner, and circulating air
passageways clean . Signs of possible blockage include:
Gas odor with extreme yellow tipping of flame .
Heater does NOT reach the desired temperature .
Heater glow is excessively uneven .
Heater makes popping noises .
Spiders and insects can nest in burner or orifices . This dangerous
condition can damage heater and render it unsafe for use . Clean burner
holes by using a heavy-duty pipe cleaner . Compressed air may help
clear away smaller particles .
Carbon deposits may create a fire hazard . Clean dome and emitter with
warm soapy water if any carbon deposits develop .
Note: In a salt-air environment (such as near an ocean), corrosion occurs
more quickly than normal . Frequently check for corroded areas and repair
them promptly .
Keep exterior surfaces clean .
Use warm soapy water for cleaning . Never use flammable or corrosive
cleaning agents .
While cleaning your unit, be sure to keep the area around the burner
and pilot assembly dry at all times . Do not submerge the control valve
assembly . If the gas control is submerged in water, do NOT use it . It
must be replaced .
TIP:
Use high-quality automobile wax to help maintain the appearance of
your heater . Apply to exterior surfaces from the pole down . Do not
apply to emitter screen or domes .
Owner's manual: model 82300C portable outdoor heater