Setting Up Your Chipper Shredder Vacuum - Troy-Bilt 70 Operator's Manual

3
Setting Up
Your
Chipper
Shredder
Vacuum
NOTE: The bag/chute
switch button attached
to the mounting
bracket must be fully
depressed by the tip of
front tab on bag handle
when securing the bag
or engine will not start.
A
Align pin
with this
hole.
Figure 3-
A
B
Figure 3-6
Attaching The Hose Assembly
5. a. Slide hose adapter of hose assembly into the
base adapter located on the left front of the Yard
Vacuum. See Figure 3-5.
b. Pull spring loaded pin out on the base and align pin
with the first hole (closest to the end of the tube) in
the hose adapter.
B c. Release the pin to lock the hose in place.
6. a. Snap the hose handle first into the upper hose
handle bracket and then into the lower hose handle
bracket. See Figure 3-6.
b. Lay hose tubing on hanger bracket next to chipper
chute.
8