Controls & Features - Troy-Bilt 769-03618 Operator's Manual

Controls and Features
NOTE: This Operator's Manual covers various models of tillers
and the machine illustrated may vary slightly from your tiller.
Engine Controls
For detailed information on all engine controls refer to the
seperate Engine Operator's Manual.
Wheel Drive Pins
Each wheel is equipped with a wheel drive click pin that secures
the wheel to the wheel shaft. The wheels can be positioned in
either a WHEEL DRIVE or a FREEWHEEL mode.
Forward Clutch Bail
The forward clutch bail controls the engagement of the forward
drive of the wheels and tines.
Reverse Clutch Control
The Reverse Clutch Control controls the engagement of reverse
drive to the wheels and tines.
10
Forward Clutch Bail
Figure 4-1
Reverse Clutch Control
Depth Regulator
Handlebar
Height
Adjustment
Wheel Drive Pin
Depth Regulator Lever
This lever controls the tilling depth of the tines. Pull the lever
back and slide it up or down to engage the notched height
settings.
Handlebar Height Adjustment
The handlebar height is adjustable to three different settings. In
general, adjust the handlebars so they are at waist level when the
tines are 3-4" in the ground.
Gas Cap
Unthread the gas cap to add gasoline to the fuel tank.
Oil Fill
Engine oil level can be checked and oil added through the oil fill.
4