Section
5
Maintenance
WARNING
Before inspecting, cleaning or
servicing the machine, shut off engine,
wait for all moving parts to come to a
complete stop, disconnect spark plug
wire and move wire away from spark
plug. Remove ignition key on electric
start models.
Failure to follow these instructions can
result in serious personal injury or
property damage.
NOTE: All references to left, right, front
and rear of the machine are determined by
standing behind the handlebars and facing
the direction of forward travel.
28
REQUIRED MAINTENANCE SCHEDULE
PROCEDURE
Check engine oil level
Clean engine cooling system
Test operation of Forward Interlock
Safety System
Forward Interlock Safety System –
check wire condition,connections
Check electrical connections
Recharge battery
Check drive belt tension
Check nuts and bolts
Clean tiller tine shaft
Lubricate tiller
Change engine oil*
Clean foam element air filter
Check paper element air filter
Check for oil leaks
Check gear oil level in
both transmissions
Check bolo tines for wear
Check reverse disc for wear
Check air pressure in tires
* During engine break-in period, change engine oil after first 2 hours of operation.
Before Every Every
Each
10
25
Use
Hours Hours
Hours
•
•
•
•
•
•
•
•
•
•
•
•
•
Every
As
30
Noted
Every 5
operating hrs.
Section 4
Before/after
long storage
After initial
2 hours
After initial
2 hours
More often
in dusty or
dirty areas
More often
in dusty or
dirty areas
After initial
2 hours
•
After initial
2 hours
•
•
•