Operation; Installing The Usb Wireless Dongle; Starting Up The Projector - BenQ Home Entertainment Series User Manual

Operation

Installing the USB wireless dongle

Follow the illustrations below to install the USB wireless dongle. Make sure that the lamp cover is
installed back after the USB wireless dongle is plugged. Do not turn the power on with the lamp cover
open.
1

Starting up the projector

1. Plug the power cord. Turn on the power outlet switch
(where fitted). The power indicator on the projector
lights orange after power has been applied.
2. Plug the USB wireless dongle. It is highly recommended
to plug it into the hidden dongle port located under the
lamp cover. If not, the 2 USB ports in the rear view also
support USB wireless dongle.
3. Press on the projector or remote control to start
the projector. The power indicator flashes green and
stays green when the projector is on.
The start up procedure takes about 30 seconds. In the later stage of start up, a startup logo is
projected.
(If necessary) Rotate the focus ring to adjust the image clearness.
4. If this is the first time you turn on the projector, the setup wizard appears to guide you through
setting up the projector. If you have already done this, skip this step and move on to the next step.
• Use the arrow keys ( / / / ) on the projector or remote control to move through the menu
items.
• Use OK to confirm the selected menu item.
• Use Back to return to the previous menu.
• Use Android Menu on remote control to skip a menu.
14 Operation
2
4
3
5