SATO Argox CP-EX Series User Manual page 34

CP-EX / CX Series
User Manual
The following table explains printer controls and indicators'
functions to help understanding LED indications and printer
status:
Control /
Indicator
Power
Switch
Power LED
Ready LED
Compact Printer Series - User's Manual
On: turns on normal operation (at "I"

position)
Off: turns off power ( at "O" position)

Note: Turn power off before connecting or
disconnecting cables
It will start blinking while "Media Out",

"Media Gap Not Found" or "Ribbon Out"
has been detected.
 Once printer cutter mode has been
enabled, when Cutter is jammed with paper
or Cutter is not installed, POWER indicator
will blink.

When RS-232 communication error is
detected, POWER indicator will blink.
 When printer is started, the READY
indicator will blink. In Ethernet model, the
READY indicator will blink for several
seconds to wait till Ethernet Card is ready.
 When printer receives data from host PC,
READY indicator will start blinking.
 READY indicator will blink when printing is
paused.
It will start blinking while "Media Out",

30
Function