Britax GROW WITH YOU User Manual page 37

Britax Child Safety, Inc.
3. Turn and push the buckle
retainer through the slot
in the child seat shell.
NOTE: Select the slot
closest to, but not under
the child.
4. Pull the belly pad through
the corresponding slot
in the seat cover. Place
the seat cover back in
its original position and
attach the retaining clips.
5. Hook the harness
straps to the hip anchors.
NOTE: Ensure that the
harness is attached to the
top of the hip anchor.
6. Insert the harness straps
through the slots in the
cover and shell, and over
the harness adjuster
plate to the back of the
child seat.
7. Nest the harness straps
by inserting the right
strap loop into the left
strap loop.
8. Remove the harness yoke
from storage underneath
the seat shell and slide
the nested harness straps
completely onto the
harness yoke.
34