FujiFilm Instax Square SQ20 Users Manual, Trouble Shooting, Safety Precautions page 58

Printing (Continued)
⁄
Adjust the image effect as necessary.
(Pages 59 and 60)
@
Press the
EN
The screen below appears.
¤
Press the MENU/OK button.
Printing starts.
• To cancel printing press the
#
58
(Print) button.
(Back) button.
When the film has been
ejected (the camera stops
making a sound), grab the
edges of the film, then take
it out.
■ Film remaining indication
Dots on the right of the monitor indicate the number of
remaining films.
One dot turns gray every time you print an image.
• When there are only two films left, dots turn
red.
R For a still picture, you can print an image that is zoomed
in or print four or nine images on one film. Use the
command dial to change to the multiple image display
on step 2 when the image to print is displayed. (Page
54)
• For details on taking out the film, refer to the
instructions and warnings on the FUJIFILM Instant
Film "instax SQUARE" pack.
• The development time is approximately 90 seconds.
(The time varies depending on the ambient
temperature.)