Emerson FISHER RSS Series Instruction Manual

Instruction Manual
Form 5592
March 2005
Design RSS Lined Valve
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Scope of Manual . . . . . . . . . . . . . . . . . . . . . . . . . .
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Packing Maintenance
Replacing Packing and Bushing Inserts
Trim Maintenance . . . . . . . . . . . . . . . . . . . . . . . . .
Disassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts Ordering . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Introduction

Scope of Manual

This instruction manual includes installation,
maintenance, and parts information for 0.5 through
4-inch Design RSS lined globe valves. Refer to
separate manuals for instructions covering the
actuator, positioner, and accessories.

Description

The Design RSS lined globe-style valve (figure 1)
has pure-modified PTFE trim parts, push-down-to-
close action, and positive shutoff. This valve is
intended for applications involving severely corrosive
and toxic flowing media, and is well-suited for pure
media applications, as well. The Design RSS valve
body provides an economical alternative to alloy
valve bodies in a wide variety of applications.
No person may install, operate, or maintain a Design
RSS valve without first D being fully trained and
qualified in valve, actuator and accessory
installation, operation and maintenance, and
D carefully reading and understanding the contents
of this manual. If you have any questions concerning
these instructions, contact your Fisher sales office
before proceeding.
www.Fisher.com
. . . . . . . . . . . . . . . . . . . . . .
. . . . . .
1
1
1
1
2
3
5
5
7
7
8
10
10
W4453-1 / IL
Figure 1. Design RSS Valve with Type 667 Actuator

Specifications

Specifications for the Design RSS valve are shown
in table 1. If the valve is shipped with the actuator,
some of the valve specifications are on the valve
nameplate, which is attached to the actuator. If the
valve is shipped without the actuator, the valve
nameplate is wired to the valve.
Neither Emerson, Emerson Process
Management, nor Fisher assume
responsibility for the selection, use, or
maintenance of any product.
Responsibility for proper selection,
use, and maintenance of any Fisher
product remains solely with the
purchaser and end-user.
RSS Valve
and Type 3582 Positioner
Note