Connecting To The Headset - Sharp Aquos R3 User Manual

Connecting to the headset

1
Insert the plug of the headset into the 3.5mm
earphone jack on the handset
Insert the plug properly all the way in. If it is inserted only
z
halfway, you may not hear sounds.
Dirty terminals can cause poor contact. Use a dry cotton swab
z
or the like to clean the terminals. Be careful not to damage to
terminals while cleaning them.
Do not deform the headset plug or 3.5mm earphone jack. May
z
cause a malfunction.
z If a strong load is applied on 3.5mm earphone jack when
connecting the headset, the waterproof and dustproof
performance could be compromised.
153
External Device Connection