Safety Information - Tripp Lite B132-004 Owner's Manual

Cascaded Installation
4
Connect the B132-004 Local Units to the desired number of B132-
100 Remote Units (sold separately) or B132-100-WP Wallplates (sold
separately) using Cat5e/6 cable. One B132-100 or B132-100-WP is
required for each Output port on the B132-004 Local Units. Note:
Remote connection methods will vary. (See the B132-100 or B132-100-
WP Owner's Manual for details.)
5
Follow the instructions in the Owner's Manual that comes with your
B132-100 Remote Unit or B132-100-WP Wallplate to complete the
installation.

Safety Information

• To reduce the risk of electric shock, do not expose this product to rain or
moisture.
• Operate this product using only the included external power supply. Use
of other power supplies could impair performance, damage the product,
or cause fire.
• Use only recommended accessories to avoid fire, shock or other hazards.
• Unplug this product before cleaning. Use a damp cloth for cleaning. Do
not use cleaning fluids or aerosols, which could enter the unit and cause
damage, fire or electrical shock.
• Do not attempt to service the unit. Instead, disconnect it and contact your
Authorized Reseller or technician.
• Use of this equipment in life support applications where failure of this
equipment can reasonably be expected to cause the failure of the life sup-
port equipment or to significantly affect its safety or effectiveness is not
recommended. Do not use this equipment in the presence of a flammable
anesthetic mixture with air, oxygen or nitrous oxide.
6