• Transmits and extends a single VGA signal to up to 4 monitors using inexpensive Cat5e/6 cable; up to 500 ft (1024 x 768, 3db) from the source • Expand the number of connected monitors by chaining up to 3 B132-004 Extender/Splitters together •...
Function Description Source Video-In Port: HD15 Female. Local Video-Out Port: HD15 Female. Power LED: LED illuminates when the unit is plugged in and receiving power. Power Jack: 12.6V, 3A power supply connects to the unit here. Output Ports: (x4) RJ45 Female; connect Cat5e/6 cable between each port and a B132-100 VGA Over Cat5 Extender/Splitter Remote Unit (sold separately) or B132-100-WP VGA Over Cat5 Extender/Splitter Wallplate (sold separately).
Note: Test to make sure the entire installation works properly before pulling cables through ceilings/walls. Connect your computer to the Source port on the B132-004 using a VGA cable. (Optional) Connect a local monitor to the Local port on the B132-004 using a VGA cable.
Splitter Rackmount Bracket (sold separately) is recommended for rackmount installations. The B132-004-RB is designed to comfortably fit 3 of the B132- 004 Local Units in 1U of rack space. If you are using a B132-004-RB, attach all of the B132-004 Local Units to the bracket before continuing.
Cascaded Installation Connect the B132-004 Local Units to the desired number of B132- 100 Remote Units (sold separately) or B132-100-WP Wallplates (sold separately) using Cat5e/6 cable. One B132-100 or B132-100-WP is required for each Output port on the B132-004 Local Units. Note: Remote connection methods will vary.
Page 7
Service under this Warranty can only be obtained by your delivering or shipping the product (with all shipping or delivery charges prepaid) to: Tripp Lite; 1111 W. 35th Street; Chicago IL 60609; USA. Seller will pay return shipping charges. Call Tripp Lite Customer Service at (773) 869-1234 before sending any equipment back for repair.