Table of Contents
Advertisement
Setting up Your px4-400r Network Storage
2.
Use the included network cable to connect the px4-400r to your network hub or switch.
3.
Connect the included power cord to the back of the px4-400r and to an Uninterruptible Power
Supply (UPS).
4.
Power on the px4-400r.
5.
From a computer on your network, open a web browser and go to http://setup.lenovoemc.com to
set up your px4-400r on your network. For best results, use a computer that is connected to the
same subnet or network segment as the px4-400r.
You can access the px4-400r Management Console directly by entering the IP address or model
name of your px4-400r in your computer's web browser. To use the model name on a Mac, add
.local after the name in the browser (for example, px4-400r.local).
6.
OPTIONAL: if desired, install the LenovoEMC Storage Manager and Media Aggregation software.
If you install LenovoEMC Storage Manager, its icon will appear in the System Tray (Windows) or
Menu Bar (Mac). The LenovoEMC Storage Manager will automatically scan your network and
connect to available Shares.
If you receive a message from your operating system's firewall alerting you of network activity, be
sure to unblock communications.
Mac Users: Shares on the px4-400r will mount and appear on the Mac Desktop.
PC Users: Shares on the px4-400r will automatically be assigned a drive letter and will be
available in the Network Drives section under My Computer.
For information on device components, connectors, controls, and indicators, refer to
Management: About the px4-400r Network Storage Array
Important Rackmount Instructions
Please observe the following requirements when the px4-400r is installed in a closed or multi-unit rack
assembly:
Elevated Operating Ambient - The operating ambient temperature of the rack environment may
●
be greater than room ambient. Ensure the installation environment does not exceed the maximum
ambient temperature specified for the px4-400r.
Reduced Air Flow - Installation of the px4-400r in a rack should be such that the amount of air
●
flow required for safe operation of the equipment is not compromised.
Mechanical Loading - Mounting of the px4-400r in the rack should avoid uneven mechanical
●
loading that could result in a hazardous condition.
Circuit Overloading - Consideration should be given to the connection of the px4-400r to the
●
supply circuit and the effect that overloading of the circuits might have on over-current protection
and supply wiring. Appropriate consideration of equipment nameplate ratings should be used
when addressing this concern.
Reliable Grounding - Ensure the installation maintains reliable grounding of rack-mounted
●
equipment. Particular attention should be given to supply connections other than direct
connections to the branch circuit (e.g. use of power strips).
6
Network Connection
Components.
Hardware
Hide quick links:
Advertisement
Table of Contents
