Sony STR-DN1070 Service Manual page 22

STR-DN1070
13. Factory Initialize (Factory Settings)
Return all of the unit setting to their factory defaults.
Operation:
1. Press the [ ] button to turn the power on.
1
2. While pressing [DISPLAY MODE] button, press and release
the [MUSIC], [2CH/MULTI], [MOVIE] button in order, the
message "SERVICE IN" appears.
3. Enter the SVC service mode. The OSD menu on TV monitor
can be operated by remote commander.
4. Select Factory Initialize. (go to Screen 1).
5. The set will turn off automatically.
(Screen 1)
Service Mode Menu
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network -- > Not Support In This Model
[5] Version Up
[6] System Information
[7] EMC Test Mode
[8] Drive -- > Not Support In This Model
[9] HDD mode
[10] RF Test Mode
HELP: [DOWN] [ENT]
14. Network
Network menu for the wired ethernet.
Note: Not used for the servicing.
15. Version Up Test (Disc Update)
This screen performs version update test.
Note: Not used for the servicing.
16. System Information (System Information Display)
This screen displays system information.
Screen 1: Basic Information
Operation:
[,] Basic Information displayed (go to Screen 2)
[BACK] Returns to service top menu
Screen 2: Basic Information (continue)
Operation:
[ ] Basic Information displayed (go to Screen 1)
<
[BACK] Returns to service top menu
When delta IOP is measured, it becomes impossible to use the
Version Up function.
22
Contents List:
Main LSIname
Model
Destination
Sequence Number
MAC
IP
IF-con Main Version
IFCon ADSP Coeff Version
Bootloader Version
Host Main Version
MicroBE Version
Host Sub Version
Middleware Version
ADSP Version
ADSP Coeff Version
2nd DSP Version
ADSP Version
IF_MODEL
IF_DEST
WLAN module Serial
WLAN module hw version
WLAN module MAC Address
Drive Firm Revision
(Screen 1)
System Information
Main LSIname:
Model:
Destination:
Sequence Number:
MAC:
IP:
IF-con Main Version:
IFCon ADSP Coeff Version:
Bootloader Version:
Host Main Version:
MicroBE Version:
Host Sub Version:
Middleware Version:
ADSP Version:
ADSP Coeff Version:
2nd DSP Version:
ADSP Version:
HELP: [RET] [RIGHT]
(Screen 2)
System Information
IF_MODEL:
IF_DEST:
WLAN module Serial:
WLAN module hw version:
WLAN module MAC Address:
Drive Firm Revision:
Bluetooth Device Address:
HELP: [RET] [LEFT]
17. Drive
This menu is used to operate the drive using drive-related diagnos-
tic and tools.
Note: Not used for the servicing.