Panasonic ER‑GD61 Operating Instructions Manual page 15

3. Wipe off the water with a towel
and let it dry naturally.
• It will dry faster with the blade
removed.
4. Apply the oil to the blade after
drying. (See page 16.)
5. Attach the blade and the
protective cap to the main body.
• Be sure to place the protective
cap on the main body to
protect blade when storing.
►With the brush
1. Remove the attachment and blade.
(See page 12 and this page.)
2. Clean the main body using the brush.
3. Clean the blade using the
brush.
• Keep pressing down the
cleaning lever ( ) to raise
c
the moving blade (
cleaning between the
stationary blade (
e
moving blade.
4. Apply the oil to the blade. (See page 16.)
5. Attach the blade and the protective cap to the main
body.
• Be sure to place the protective cap on the main
body to protect blade when storing.
PB016970 - ER-GD6151 _(01GB)_12-04-18.indd 15
ER-GD61
c
) when
d
) and the
d
Removing and mounting the blade
• Please check if the blade is deformed or damaged
before removing and mounting it.
Removing the blade
►
1. Hold the main body in front.
2. Push the metal part of the blade
to the left with the thumb's belly.
• It is no problem when touch the
blade by fingers.
• Be careful not to let the blade fall.
Mounting the blade
►
Fit the mounting hook (
( ) on the main body and then push in until you
A
hear a click.
A B
e
) into the blade mounting
B
Click
2018/12/4 9:33:36
15