Specifications - Tripp Lite Network Dataline Surge Suppressors Installation Manual

SPECIFICATIONS

All surge suppressors listed have component response times of less than 1 picosecond.
Model:
DHUB
DHUB-18V
* Supplied with eight 4" RJ45 patch cables.
DRS232
DNET1
DSUT1CSU
DTEL2
DB9
DB15AUI
2
Nominal
Description:
Clamping Voltage:
DHUB: RJ45, 8-port
ethernet, token ring
7.5 volts, protecting
RS422/423/485, AS400/
wires 1-8 on all ports.
Sys3x protector for hubs,
repeaters, terminal
servers, MUXs, MAUs,
etc.*
18 volts, protecting
DHUB-18V: RJ45, 8-port
wires 1-8 on all ports.
RS 232 protector for
multiport serial devices.*
RJ45/RJ11 protector for
100Base-T4, RS-232 on
18 volts, protecting wires
twisted pair (wires 1-8) or
1-8.
ISDN "S/T" interfaces.
Supplied with 4" RJ45
patch cable.
RJ45 100Base-T, 10Base-T,
Token Ring, RS422, AS400/
7.5 volts, protecting
Sys3x protector for NICs,
wires 1-8.
hubs, routers, etc. Supplied
with 4" RJ45 patch cable.
RJ45/RJ11 protector for
nonspan powered T-1
equipment , digital data
60 volts, protecting wires
service CSUs/DSUs, ISDN
1-8.
"U" interfaces or other
digital lines. Supplied
with 4" RJ45 patch cable.
RJ45/RJ11 for modems,
260 volts, protecting
answering and fax
center 4 wires (2 CO-
machines. Supplied with
4" RJ11 patch cable.
lines).
Serial DB9 RS-232
protector for male or
female ports of data
terminal and computing
18 volts, protecting
equipment including
pins 1-9 and chassis.
PCs, modems, etc. (any
male or female 9 pin
port). Male/Female
genders are reversible
with reversible
thumbscrews.
7.5 and 18 volts,
DB15 ethernet AUI
protecting all IEEE
protector.
802.3 pins.
Peak Pulse
Current:
750 amps
340 amps
340 amps
750 amps
200 amps
250 amps
340 amps
750 amps