Specifications - Tripp Lite B110-SP-HDMI Quick Start Manual

Package Contents
Multiple Device Protection:
1. Disconnect the installed HDMI cable from both devices you wish to protect.
2. Connect the In-Line HDMI Surge Protector to each end of the previously uninstalled
HDMI cable, ensuring both ends of the HDMI cable are connected to the "Cable End"
of the In-Line HDMI Surge Protector.
3. With user-supplied HDMI cables, connect the "Equipment End" of each In-Line HDMI
Surge Protector to the HDMI devices you wish to protect.
Note: For maximum protection, the HDMI cable between the "Equipment End" of the In-Line
HDMI Surge Protector and the HDMI equipment to be protected should not exceed 3 ft.
(0.9 m). Tripp Lite P568-003-Series High-Speed HDMI cables are recommended.
4. Connect the ground wire to either end of each In-Line HDMI Surge Protector and then
to earth ground.
HDMI Monitor
Equipment
(Protected)

Specifications

Input / Output Connectors
ESD Protection
EFT Protection
Surge Protection
Surge Reaction Speed
Operating Temp
Maximum Video Resolution
HDMI
HDCP
Dimensions
Weight
18-09-006-93384E.indb 3
In-Line HDMI
Surge Protector
Cable End
End
HDMI Type-A (Female)
15kV (ESD), 8kV (Contact)
40A (5/50ns)
5A (8/20ns)
<1ns
32°F to 131°F (0°C to 55°C)
4K x 2K @ 30 Hz
1.4
Pass through (up to 2.2)
1 x 1 x 2.3 in. (25.4 x 25.4 x 58.3 mm)
0.08 lb. (35g)
In-Line HDMI
Surge Protector
Equipment
3
HDMI Player
End
(Protected)
10/2/2018 10:41:58 AM