ATEN KVM over IP Matrix Series User Manual page 287

Mute Command
The Mute command allows you to enable or disable the audio.
The formula for the Mute command is as follows:
Command + Output + Num1 + Control + [Enter]
1. For example, to turn mute off (audio on) for the Receiver, type the
following:
mute off [Enter]
2. For example, to turn mute on for Receiver (192.168.0.11), type the
following:
mute o192.168.0.11 on [Enter]
3. For example, to turn mute off for Receiver (192.168.0.18), type the
following:
mute o192.168.0.18 off [Enter]
The following tables show the possible values for the Mute commands:
Command
mute
Output
o
Num1
xx
Control
on
off
The following table lists the available Mute commands:
Command
mute
mute
Mute command
Output port command
Output number
xx: Receiver ID or IP address
Mute on; audio disabled
Mute off; audio enabled (default)
Output Num1
o xx
o xx
Chapter 12. CLI Commands
Description
Description
Description
Description
Control Description
on Turn mute on for output xx
xx: Receiver ID
off Turn mute off for output xx
xx: Receiver ID
267