Mob (Man Over Board) - JRC JMR-5410-4X Instruction Manual

3.12 MOB (Man Over Board)

When a person falls overboard, this monitoring function prevents loss of sight of the position of the
person overboard.
The MOB use procedure is as follows.
1
Click on the MOB button on the right toolbar.
The [Marker] dialogue box appears and the MOB marker is displayed on the own ship's position
when the button is clicked on.
Memo
The [Marker] dialogue box appears by clicking [Tool] - [MOB] on the menu
2
Monitor with the screen and the [Marker] dialogue box.
The position relationship between the own ship that is moving and the MOB marker is displayed
as follows.
The following items are displayed in the Marker dialogue.
Display item
Position
Bearing
Range
TTG
Time
To exit from MOB
1
Click on the [X] button in the [Marker] dialogue box.
A confirmation dialogue box appears.
2
Click on the [OK] button.
The [Marker] dialogue is closed.
The MOB marker is cleared
Section 3 Common Basic Operations
MOB marker
Displays the coordinate of the MOB marker.
Displays the bearing from the own ship to the MOB marker.
Displays the range from the own ship to the MOB marker. The unit of range
is switched whenever the M/km/sm unit switching button is clicked on.
NM denotes nautical mile, sm denotes statute mile, and km denotes
kilometre
Displays the time to reach the MOB marker from the ship speed.
Displays the time elapsed after clicking on the [MOB] button.
Own ship's symbol
Position and bearing from own ship
Contents
3-20