Sagem MY C2-2 User Manual page 69

Troubleshooting
P - S
ROBLEM ITUATION
Operator name does not appear on
screen
How do I switch to silent mode?
How do I remove the envelope
shown on the screen?
How do I remove the voice mail
icon shown on the screen?
How do I remove the written
message "1 call" displayed on the
bottom of the screen?
How do I download ring tones?
How do I free up memory to
download my objects (sounds,
images)
How can I increase the efficiency of
my phone?
The network provider's name is not displayed on the screen.
Go into the Settings menu, select Networks, then Selection. Wait until the
screen shows the name of your network provider, select if and validate.
You can activate the silent mode by holding down the
mute the phone when it is ringing, you will just need to press briefly on the
key.
This icon indicates that you have received either a written text message or a voice
mail.
If you have received a text message, please enter the Messages menu, select the
Inbox menu and read it. The envelope is then deleted.
If you have received a voice mail, please call your voice mail box and listen to it.
Please follow the instructions given.
This icon indicates that you have received a voice mail. Please call your voice mail
box and listen to it. Please follow the instructions given
Press the Off key to go back to the home page: this message will be deleted.
Logon to one of the following site via your computer: www.planetsagem.com. This
site offers to send ring tones to your phone in the form of an SMS. You can also
logon to your operator's site. Once the SMS has been received, all you have to do
is save it: accept the option "Save messages", the tune will then be added to your
list. In addition, you can logon to some sites by phone.
Go into the Settings menu, select My objects then delete some objects (too
many).
The most efficient actions are as follows:
You can deactivate the backlight (in the menu Settings/Energy saving) or be
carefully where you keep your phone to make sure that the keys can't be pressed
accidentally because any key press will activate the backlight.
You can deactivate the screensaver or select the activation time to be more than
every 300 s (the screensaver uses processing power).
A
CTIONS
key. If you want to
67