Sagem MY C2-2 User Manual page 16

My phone in 5 minutes
Setting time and
date
Network
If your provider's icon (or logo) is displayed on the screen, calls can be made on its network.
If the letter R and a network name are displayed, calls can be made on that particular network.
If the letter R is displayed without any network name, only the emergency services can be called (ambulance,
police, fire brigade).
If the network icon flashes, the phone is permanently searching for the network. There is no network available.
The signal strength symbol, shown on the top right-hand corner, displays the quality of the reception. If it
indicates less than three bars, please search for better reception in order to call in good conditions.
14
The first time the phone is used, the time and date will need to be set.
If the battery has completely run down or been taken out, you will be
asked to confirm the time and date.
Setting the date:
Set the date either by typing it in numerically or by using the up / down
arrows to alter the display.
Use the key (or key
field.
Once the date is correct, press the right programmable key
confirm.
Setting the time: Same procedure as above.
From now on, the phone will search for a network on which calls can be
made. When one has been found, its name will be displayed on the
screen. You are then ready to make or receive a call.
) to access the next (or previous) data input
to