Table of Contents
Advertisement
Control Panels
Familiarize yourself with the location and function of the front and rear panel
features before installing and operating your UPS.
FRONT PANEL
2
1. "ON/OFF" Switch: This momentary rocker switch turns the UPS System's inverter
2. "SELECT" Button: This button performs two functions: it allows you to browse
3. LCD Display: This backlit (16x2 character) dot matrix display indicates a wide range
4. "I/P" (Input) LED: This green light will illuminate constantly to indicate an AC input
5. "AC/DC" (Converter) LED: This green light will illuminate constantly to indicate the
6. "DC/AC" (Inverter) LED: This green light will illuminate constantly to indicate the
7. "O/P" (Output) LED: This green light will illuminate constantly to indicate your UPS
8. "BYPASS" LED: This green light will illuminate when the UPS is providing filtered
9. "BATTERY" LED: This red light will illuminate when the UPS is discharging the
3
ON and OFF.
through different power readings on the LCD Display by momentarily pressing the
button; it also allows you to silence the UPS alarm by pressing and holding the button
for 3 seconds.
of UPS operating conditions and diagnostic data. It will illuminate after you have
properly completed installation and start-up and after the "ON/OFF" Switch is turned
ON.
supply is present.
UPS's AC/DC converter is activated.
UPS's DC/AC inverter is activated.
is supplying AC power to connected equipment.
mains power without engaging its converter or inverter. Connected equipment will not
receive battery power in the event of a blackout.
battery to provide connected equipment with AC power. An alarm will sound which
can be cancelled by pressing and holding the "SELECT" switch for 3 seconds. The
alarm will be cancelled, but the LED will remain illuminated.
8
4
5
9
6
1
7
3
Advertisement
Table of Contents
