Pci-E 3.0 Slots - Supermicro X11DDW-L/NT User Manual

2.10 PCI-E 3.0 Slots

PCI-E 3.0 Slots
There are several PCI-E slots located on the motherboard. Refer to the layout below for their
locations.
Notes: 1) After you've enabled VMD on a PCI-E slot of your choice, this PCI-E slot
will be dedicated to VMD use only, and it will no longer support any PCI-E device. To
re-activate this slot for PCI-E use, please disable VMD. 2)To avoid causing interference
with other components, please be sure to use an add-on card that is fully compliant
with the PCI-standard on a PCI slot.
1
JL1
JNVI2C2
VROC (JRK1)
CPU2
FAN6 FAN5
LE1
C
JUIDB1
A
USB2/3
(3.0)
LAN2 LAN1
JM2_1
LE3
2
C621
S-SATA 0~3 I-SATA 0~3 I-SATA 4~7 JBT1
T-SGPIO3
SRW1
BIOS LICENSE
MAC CODE BAR CODE
BT1
X11DDW-L PWRRST PS UID NIC NIC HDD PWR
ON FAIL LED 2 1 LED LED
REV:1.02
DESIGNED IN USA
CPU1
FAN4 FAN3
71
1. PCI-E 3.0 (x16 + x16) Left
Riser Card (SXB1)
VGA
2. PCI-E 3.0 x16 Right Riser
IPMI_LAN
USB0/1(3.0)
Card (SXB2)
10G PHY
3. PCI-E 3.0 x16 SAS3 AOM
JSTBY1
Controller (JAOM)
BMC
3
LEDM1
JAOM
JF1
LE2
X NMI
FAN2 FAN1
Chapter 2: Installation